Chemicals

Splash protection - ESAB PRE-WELD Liquid ESAB Pre-Weld - is much more than the traditional means of struggle with splashes of metal. Concern ESAB able to develop a product with a high content of active substance than any other liquid. The liquid evaporates from the surface of the workpiece, providing excellent protection against weld spatter across the surface. The liquid is made of oil, is completely safe, it contains no hazardous or dangerous components. Silicone soluble in water, does not affect the paint, or other methods of processing after the welding. The aerosol can be in 600 ml of active fluid, solvent-free. The liquid is in the aluminized bag inside a metal container. The air pressure pushes the fluid around the bag when the valve is opened. This makes it possible to apply the liquid at any angle and use all the liquid evenly. It should be noted that only goes active liquid, so the product is so effective. When welding ESAB PreWeld stainless steel may replace pickling paste. If the liquid is applied to the weld metal and then, after cooling, the discoloration can be removed with a cloth of a non-abrasive material

To protect the joints of long efficient use of cans capacity of 10 and 25 liters. For applying liquid used plastic containers-dispensers. fluid properties in cans similar to those of an aerosol can.

ESAB Pre-Weld anti spatter 600 ml 0700 013 013

ESAB Pre-Weld anti spatter 10 L 0700 013 014 ESAB Pre-Weld anti spatter 25 L 0700 013 015 Nozzle for 10 l container 0700 014 017 Nozzle for 25 l container 0700 014 018 Capacity for manual spraying 0000 138 408

LIQUID HIGH-TECH Combines continued effectiveness with effective protection of the environment and health. High-Tech Spray protects against adhering spatter on the workpiece. High-Tech Aerosol completely non-flammable, does not apply to toxic substances, does not emit harmful gases, is not dangerous for the skin. Blowing - compressed air spray does not contain solvents and is not conducive to indirect air pollution or the greenhouse effect. It does not contain silicone; is water based.

To protect the joints of long efficient use of cans capacity of 10 and 25 liters. For applying liquid used plastic containers-dispensers. fluid properties in cans similar to those of the aerosol packaging High-Tech 400 ml 0760 025 500

High-Tech 10 L 0760 025 010

High-Tech 25 L 0760 025 025

Capacity 10 l 0700014 017

Capacity 25 l 0700014 018

Capacity for manual spraying 0000 138 408

STAIN CLEAN stainless steel surface after welding is generally oxidized and changes color. Close the seam also occurs chromium loss. This means that the reduced corrosion resistance. To restore the corrosion resistant properties of the oxide layer must be removed, and the surface of the metal, changing its color and lose chrome. This can be done by sanding, blasting or etching. The latter method is the simplest and cheapest. In most cases, etching provides the best surface appearance. New paste StainClean superior to conventional pickling paste properties. Thanks to a special him.sostavu and jelly-like consistency it is very easy to use. The paste provides high purity and an excellent bead appearance.

Stainclean 1,0 (Bank 1 kg) Box 6 cans 2129001000

Stainclean 2,0 (Bank 2 kg) Box 4 Banks 2129002000