FlexFilter 13 and 18 EX
Delivery
Доставка по Украине БЕСПЛАТНАЯ
до подъезда Вашего дома, сроки доставки от 2-х до 5-ти рабочих дней
Payment
Наличными, на карту Приват Банка, оплата по счету для физ. лиц , безналичный расчет для юр. лиц с НДС
Guarantee
Гарантия от производителя 12 месяцев, обмен/возврат товара в течение 365 дней
The FlexFilter 13 and 18 EX are high vacuum filters used in applications with a working vacuum of max. 40.000 Pa (5,80 psi). The filter can be used in applications where there is a high content of explosive dust particles.
The FlexFilter 13 and 18 EX are high vacuum filters used in applications with a working vacuum of max. 40.000 Pa. The filter is made in galvanized steel sheet which makes it a very competitive alternative to other high vacuum filters. The FlexFilter 13 and 18 EX can be used in applications where there is a high content of explosive dust particles. The filter can be supplied with either antistatic cartridges (UniClean) or antistatic cassettes depending on the air flow, the dust type and the dust concentration. The FlexFilter 13 and 18 EX can be delivered in two different heights – type L and A. The Ex-vents 410x410 are supported on the back side to allow vacuum max 0,4 bar. The cartridges/cassettes are cleaned automatically by a high-efficiency, low energy consuming compressed air system activated by an integral electronic controller. The filter is easy to maintain due to the following features:
- The FlexFilter 13 and 18 EX are high vacuum filters used in applications with a working vacuum of max. 40.000 Pa. The filter is made in galvanized steel sheet which makes it a very competitive alternative to other high vacuum filters. The FlexFilter 13 and 18 EX can be used in applications where there is a high content of explosive dust particles. The filter can be supplied with either antistatic cartridges (UniClean) or antistatic cassettes depending on the air flow, the dust type and the dust concentration. The FlexFilter 13 and 18 EX can be delivered in two different heights – type L and A. The Ex-vents 410x410 are supported on the back side to allow vacuum max 0,4 bar. The cartridges/cassettes are cleaned automatically by a high-efficiency, low energy consuming compressed air system activated by an integral electronic controller. The filter is easy to maintain due to the following features:
- Inspection and change of the filter elements can take place within a few minutes
Application | Dust |
Certifications | CE, EX |
Compressed air requirement | 6 bar |
Dustbin volume (gal) | 50 or 100, or whitout |
Filter cleaning method | Pulse jet |
Installation | Indoor, Outdoor |
Material | Housing in galvanised steel sheet (3 mm) |
Operating Temperature | -4 to 167 F (-20 to 75 C) |
Suitable for combustible dust | Yes |
Working pressure (psi) | Max. 40.000 Pa.(5.80 psi) |